Server node issue - Cluster1, Wincf2 MSSQL8, Cluster1 CF1/CF3 - Resolved

Stephen

Stephen

US Operations
Staff member
I am making this a central thread for issues with node for these servers. It started rebooting in a loop when getting servers up, then reboot.
 
Re: Unable to create selectable TCP socket (1753 >= 1024)

We are going to try and bring all but wincf2 up, as I think it could be the issue, as it is taking a long time to boot and then near end of its boot, all is rebooting.
 
Re: Unable to create selectable TCP socket (1753 >= 1024)

MSSQL8, cf1/cf3 are all up now. I am going to work on WinCF2 by itself, so it only remains down at the moment.
 
Re: Unable to create selectable TCP socket (1753 >= 1024)

WinCF2 is moving to a different node now, I am hoping it can copy with MSSQL8/CF1/CF3 all live without making a reboot.
 
Re: Server node issue - Cluster1, Wincf2 MSSQL8, Cluster1 CF1/CF3

ETA on Wincf2 is about 25-45 minutes.
 
Re: Server node issue - Cluster1, Wincf2 MSSQL8, Cluster1 CF1/CF3

Server is booting up now, will add NICs and it will come live in the next 5-10 minutes.
 
Re: Server node issue - Cluster1, Wincf2 MSSQL8, Cluster1 CF1/CF3

Taking slightly longer than expected to add this, still a bit longer, but close.
 
You must log in or register to reply here.
Back
Top